uxcell 606-2RS Deep Groove Ball Bearing Double Sealed 180016 6mm x 17mm x 6mm High Carbon Steel Z1 Bearings Pack of 10

NOTE： Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. With small friction and high-limit speed, Uxcell's Deep Groove Ball Bearings are cost-effective and require little maintenance. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness. Single-row, pre-lubricated, normal accuracy. Selection Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: 606-2RS Sealed Type: Double Sealed Material:High Carbon Steel Heat Treatment:Quenching Hardness: HRC50-55 Cage Material: Stamping Steel Inner Diameter (d): 6mm Outer Diameter (D): 17mm Thickness (B): 6mm Dynamic Load Rating (Cr): 1.95kN Static Load Rating (Cor): 0.72kN Accuracy Class: P0 (ABEC-1) Noise Level: Z1 Number of Pack: 10 Pcs Weight: 64g